Skip to content

Home / TECHNICAL REFERENCE

TECHNICAL REFERENCE

300ml cartridge dimensions.

Separate specifications for the wide-mouth model and the flat / recessed-shoulder models. Confirm final dimensions and component fit with approved samples.

Download original drawing ↓

Wide-mouth cartridge

Wide-mouth model — separate supplied reference
ItemReferenceNotes
MaterialPE (polyethylene)Specified in the supplied reference; confirm grade with order
Capacity marking330ml on supplied referenceProduct name: 300ML wide-mouth cartridge; 330ml retained as supplied reference marking
Tube body length (diagram)215 mmHeader separately states 216 mm; final body length requires sample confirmation
Tube height (header)216 mmConflicts with 215 mm diagram label; no tolerance stated
Tube overall length230 mmDiagram includes neck; excludes attached nozzle
Tube body diameter50 mmBody diameter confirmed by customer
Neck width shown21 mmReference width; not a confirmed thread standard
Nozzle length72 mmSeparate component
Nozzle base width shown25 mmReference width; not necessarily thread diameter
Nozzle tip width shown3 mmNot a confirmed internal dispensing-hole diameter
Piston diameter44 mmReference label; confirm fit with original first-group sample
Piston height20 mmReference label; original first-group piston image retained
Tube body weightApprox. 62 gManual measurement; variation not specified
Nozzle weightApprox. 4 gManual measurement; variation not specified
Piston weightApprox. 5 gManual measurement; variation not specified

First-group imagery is retained. Only data are transcribed from the new reference; its pictured cartridge is not used. Body diameter corrected to 50mm as instructed. The reference states 330ml and gives both 215mm and 216mm body height; confirm capacity and final body length against approved samples. Weights are approximate manual measurements.

Flat & recessed-shoulder cartridges

Flat-shoulder & recessed-shoulder models — supplied reference dimensions
ItemReferenceNotes
Nominal capacity300mlCustomer-stated capacity
Tube body length215 mmExcludes the neck
Tube overall length230 mmIncludes neck; excludes attached nozzle
Tube body diameter48 mmDiameter label in supplied drawing
Neck width shown15 mmReference width; not a confirmed thread standard
Nozzle length105 mmSeparate component
Nozzle base width shown15 mmReference width in supplied drawing
Nozzle tip width shown3 mmNot a confirmed internal dispensing-hole diameter
Piston diameter46 mmMatching component
Piston overall height22 mmConvex domed top with a small central molding point

Reference values transcribed from the second/third-group drawing. No dimensional tolerances or thread standard were provided. Confirm final dimensions and component fit against approved samples. These values do not apply to the wide-mouth model.

Original customer-supplied dimension drawing for second and third cartridge groups
Original customer-supplied dimensional reference. English labels are transcribed in the table above.

Read the drawing correctly.

  • 230mm includes the neck, not an attached nozzle.
  • 215mm is the marked tube body length.
  • 15mm neck width is not a confirmed thread standard.
  • 3mm tip width does not confirm the nozzle’s internal hole diameter.
  • The piston top is convex domed, not flat.
  • No dimensional tolerance, material grade or pressure rating is supplied.

For customized parts, use the approved sample or a confirmed order drawing as the final specification.

Request sample confirmation ↗
WhatsApp ↗

Product details

Selected product detail

Confirm final appearance, dimensions and fit against approved samples.

滚动至顶部